Glock 43X VS Glock 43X MOS

Glock 43X VS Glock 43X MOS

Glock 43X VS Glock 43X MOS​Glock 43X VS Glock 43X MOS​Buy Glock 43x

Buy Glock 43x

Glock 43X VS Glock 43X MOS

The Glock 43x version has been a huge success since its 2015 release, and this success inspired Glock to broaden its market by releasing the fantastic G43x MOS.
Despite the fact that both models are good for concealed carry, there are some notable differences between both handguns in terms of their overall length, weight, width, sights, trigger, ammo capacity, and capability to handle recoil.

What are the features that differentiate the Glock 43x from the Glock 43X MOS?

Size Distinction (Width & Weight):

The 43X MOS is somewhat wider and heavier than the 43X, which is the first change between the two Glock models that you’ll notice. The G43X weighs 18.7 oz or 23.07 oz (with a loaded magazine) and measures 1.06 inches broad.
While the 43X MOS is 1.10 inches broad and weights 18.55 oz or 22.96 oz (with a loaded magazine), the former is 1.10 inches wide. The 43x MOS is hence noticeably wider and heavier than the 43x variant. You will notice that the Glock 43x MOS seems top-heavy, particularly when the weapon is fully loaded with the same ammunition.
 Despite being exceptionally thin and light compared to the majority of other handguns on the market, the 43x MOS is a bit heavier than the 43x and may feel a little chunkier. The 43x MOS fits into the hand well in addition to being lighter and wider than the 43x. Even some shooters favor handguns that are a little heavier than average, thus the 43x MOS will be the ideal option for them.

Red Dot Ready Optic Mounting System and Traditional Black nDLC Finish:

The Glock 43x has a black polymer frame and a brushed stainless steel slide in a two-tone design. It lacks a Modular optic system but has a slide length that is comparable to the Glock 43x MOS. However, the 43x offers a nearly unbeatable handling advantage thanks to its nPVD finish and front-to-back slide serrations.
The Glock 43x MOS includes a modular optic system, which is an improvement over the MOS on Glock weapons that were previously available. Additionally, the 43x MOS has a classic black nDLC finish. Additionally, it has a contemporary micro red dot design that makes shooting the target simple and faster.
The 43x MOS features a modular optic system with a contemporary micro red dot design for precise and speedier performance during continuous target shooting, as well as an extra conventional black nDLC finish. Although the 43x will also function flawlessly, it might not be the best choice for long-range target shooting.

Glock Standard Slide Lock Issues Occasional

The standard Glock slide-stop feature is included with the Glock 43x and functions flawlessly. When you lower the slide, even disassembling the pistol is fairly simple. But because it is located on the left side of the pistol, the slide lock on the G 43x is not user-friendly for lefties. Consequently, right-handed users might feel more at ease using the slide lock than left-handed users.
Although the 43x MOS also has the typical Glock standard slide lock system, customers may occasionally experience problems using it. According to reports, the slide lock occasionally pins down and refuses to engage with an empty magazine when you move the grip forward with your thumb.
Both pistols have the common slide lock and each has a drawback that users might at some point experience. However, if you use your right hand, the 43x handgun will work just well for you.

Easily Balanced and Flexible Grip

The Glock 43x combines a compact-size grip space, a built-in beavertail, and a subcompact-lean slide to provide a reliable yet comfortably balanced and adaptable grip.
However, the Glock 43x MOS gives a longer and more substantial grip since it fits the hand better (fits into any hand size), and the gun-holder does not feel as though the frame is too harsh or is biting their fingers. Additionally, the improved modest beavertail offers hands additional protection.
In conclusion, the 43x MOS’s grip quality surpasses that of the 43x version as well as the quality of the original 43 model. As a result, the 43x variant is easily defeated by the Glock 43x MOS.

Further Picatinny Rail

The Glock 43x lacks an additional Picatinny Rail and is not compatible with any further accessories, such as lasers or tiny lights.
The 43x MOS version, on the other hand, has a tiny Picatinny rail that enables you to attach it to gadgets like lasers, the Olight Mini Valkyrie, or the MantisX.
Because of its extra features, the G 43x MOS is your best choice if you want a more modernized and enhanced firearm. However, if all you need is a good concealed pistol that is fairly sophisticated and has a standard magazine capacity, the 43x will do.

glock 43x slide, glock 43x vs 43, glock 43x extended mag, glock 43x frame, glock 43x mos holster, glock 43x mos red dot

Buy Glock 43x

Which Glock 43x or Glock 43X MOS Should I Choose?

Given that the Glock 43x MOS is essentially a 43x model revision, both handguns share or have the same primary features. Because of this, it can be very challenging to tell them apart at first glance.
However, the G 43x MOS has been created with a few more features, including a classic Black nDLC Finish, a Picatinny Rail, and an Optic Mounting System (MOS) that is Red Dot Ready.
In comparison to previous Glock models, both weapons are compact and lightweight, but the 43x MOS is a little bit more pliable and suitable for OWB, IWB, and AIWB (Appendix Inside the Waistband) carrying.
However, some users might feel that the 43x MOS is a bit wider and heavier to hold, so the 43x will be better for those users.
Therefore, the bottom line is, it is absolutely up to the users’ preference and choice because the liking or preference will vary person-to-person.
The best way to find out which one to choose is to go through the specs and features of the Glock 43x and the Glock 43x MOS first.

FAQs: Frequently Asked Questions

Does the Glock 43X MOS come with a safety feature?

Yes. It comes with three safety devices, but none of them are manual safety.

Does Glock 43X MOS come with additional adapter plates?

No, this rifle does not come with an adaptor plate.

Which grain Ammo will be better for my Glock 43x?

115-grain Ammo will be better for the G 43x gun.

Is the Glock 43x +P rated?

Yes, it can handle +P ammunition.

Is it possible to ankle carry the Glock 43x pistol?

Yes, you can comfortably ankle-carry it.

Does the Glock 43X MOS come with a threaded barrel?

No. It features a non-threaded barrel.

Can I interchange my Glock 43X slide with 43 pistol slides?

Yes, they are interchangeable.

 Summary

Even though they look identical and the Glock 43x MOS is the redesigned version of the Glock 43x model, there are significant differences between their features. These disparities also affect their appearance, capacity, and handling ability. 
Therefore, consumers need to know and understand the difference well before choosing between them. All the notable differences between the Glock 43x and 43x MOS are already discussed in the earlier section of this article to make the selection task a little bit easier. Both are excellent subcompact pistols and perfect for concealed carry, but one might offer some additional features or benefits than the other. So, choose wisely.
 

Buy Glock 43x

Glock 27 VS Glock 26

Glock 27 VS Glock 26

Glock 27 VS Glock 26​Glock 27 VS Glock 26​Buy Glock 27

Buy Glock 27

Glock 27 VS Glock 26

The Glock 26 and 27 pistols are identical in terms of functionality. The gun range, size, empty weight, and all other characteristics are identical.
Between the two Glocks, 27 and 26, we must compare the same attributes while keeping in mind what those qualities mean for each Glock. These include the caliber, ammo, feeding, recoil, etc.

What Are the Features That Separate the Glock 27 and Glock 26?

Everything you need to know about the variations between a Glock 27 and a Glock 26 is provided below:

Recoil:

The sensation of recoil differs between the two. Everything depends on how much recoil each person gets when not using their pinky.
The G27 has a snappier trigger and higher recoil, but because of the weight of the pistol, it is still manageable. Because of this recoil, users are enthusiastic about the added power the Glock 27 offers.
The G26’s reduced recoil may allow for quicker follow-up rounds.
Professional shooters, in my opinion, wouldn’t even notice the difference in recoil between the two. However, the G27 will provide you more power. 

Caliber:

The biggest distinction between the two is the caliber, which is 9mm instead of.40. Yes, they resemble each other externally. But when trying to modify these two Glocks inside, the extractor and a few other parts matter.
In a Glock, the 40 S&W bullet performs better than the 9mm. The G27’s round is larger and more potently lethal. The.40 caliber has a higher chance of hitting the target and stopping.
The smaller round in the Glock 26 has less stopping power. However, this changes depending on the ammunition. 350 muzzle energy is produced.
In this instance, the 27-wins caliber, or.40, is used. Additionally, you may modify this for the Glock 26 9mm.

 The smaller round in the Glock 26 has less stopping power. However, this changes depending on the ammunition. 350 muzzle energy is produced.
In this instance, the 27-wins caliber, or.40, is used. Additionally, you may modify this for the Glock 26 9mm.

Ammo:

The list of standard ammunition for the G27 and 26 is as follows:
Glock 27:
180 gr. Federal Hydra-Shok @ 940 fps, 353# KE, and PF 169
165 gr. Remington Golden Saber at 1,028 fps with a 387# KE and PF 170
Glock 26:
Golden Saber 344# KE/PF 139 / 124 gr. +P @ 1,118 fps
Ranger T 127 gr. +P+ at 1,176 fps, 390 lb. KE, and 149 lb. PF
The 27 doesn’t kick all that severely with typical 180-grain ammo (Gold Dot, HST). The 26 however kicks less.
The Glock 26 offers reduced recoil, a larger magazine, and less expensive ammunition. Additionally, the shots are placed more precisely.
However, Golden Saber VS Golden Saber 40 has an 18% higher estimated recoil. Furthermore, there isn’t much of a difference between the 27 and the 26 after one round.
In terms of ammunition, the Glock 26 might be a better option.

Feeding:

It takes more work than you would think to get the ninth round into the G27 magazine.

Once the ninth round has been loaded, you actually need to shove the magazine catch into the gun in order for it to activate. Once engaged, the slide doesn’t want to go back.
On the other hand, the Glock 26 frequently fails to feed. Too often, it breaks down. Double feed technology is incredibly unreliable.
The G27 will be the superior choice between these two.

Concealability:

The Glock 26 and 27 are both compact weapons.
The G27’s pocket carry is its primary flaw. The widths of all the little Glocks are noticeably wider. The 27 is, nevertheless, quite big for such a small rifle. The finger extension mag is excellent for truck gun duty or wood carry.
The Glock 26, which is nearly the same size as the Glock 27, is also too tiny. Additionally, its width makes it useless for concealment.
The concealability of both Glocks is essentially the same overall. A Glock like model 19 is, in my opinion, preferable for a backup concealed carry.

Barrel:

The G27 barrel has a wider diameter than the G26. With a conversion barrel, the G27 may be made to fire 9mm rounds. The G27, however, is smoother and has less feeding problems.
The diameter of the G26 barrel is smaller. Additionally, it frequently experiences feed and sliding problems. You won’t be able to change it into a.40 barrel either.
The G27 is the owner of this feature. It is superior for smooth shooting and has a better barrel.

 glock 26 vs 43, glock 26 slide, glock 26 holster, glock 26 magazine

Buy Glock 27

Glock 26 against Glock 27 Which Should I Pick?

Both weapons are categorized as sub-compacts. People only worry about the larger G27’s recoil when comparing it to the G26.caliber 40. For a better shot group, it is preferable to give up the larger bullet. The 26 can be used to locate the latter.

However, it can be effectively regulated with the larger caliber. Therefore, the Glock 27 is a fantastic choice if you want to master the weapon as it is designed.

Actually, I preferred the.40. Yes! For me, the Glock 27 is totally dependable and would discharge anything I fed it.
It is not recommended for daily carry in terms of CCW. Because it contradicts the aim of concealability and does not provide a significant enough accuracy benefit to justify the trade-off.

Although in my right mind I would choose the Glock 26. As mentioned, the Glock 27 is normally quick. However, the good weight and wide grip help balance that. Shoot both firearms to determine which is best for you in the end.

FAQs: Frequently Asked Questions

What specific variations exist between the Glock 26 and 27?

As one might anticipate, the 9mm Parabellum uses a 9mm projectile. The 10mm projectile used in the.40 S&W cartridge.

The projectiles they are made to shoot have a diameter of 1mm, which is the main distinction.

The recoil spring in particular has different spring rates between the two firearms. The clambering and resulting difference in the recoil spring’s spring rate are the main differences.

Can the Glock 27 be converted to a 9mm with a Glock 26 barrel change?

You cannot use a typical 26-barrel, sorry. It must be a specific barrel modification from.40 to 9.

What distinguishes a conversion barrel?

The slides and ejectors in this barrel are separate.

 Summary

Both of these weapons are excellent choices if they fit your hand and carry style. They both seem like wise choices. You should unquestionably shoot the two of them and make your own decision. But the G27 is a well-rounded weapon. It balances its positives and negatives. Although accurate, concealable, and powerful, it is heavy and difficult to conceal. The remainder of the information is provided in this article for your judgment after that.  

Buy Glock 27

Glock 19 VS Glock 44

Glock 19 VS Glock 44

Glock 19 VS Glock 44Glock 19 VS Glock 44Buy Glock 19

Buy Glock 19

Glock 19 VS Glock 44

More and more people are thinking about the Glock 44 as a Glock 19 trainer because 9mm prices have soared. A Glock 44 is fun to shoot. The 19s speak for themselves.
High velocity ammo works great in the Glock 44. However, the Glock 19s are still superior to the G44. Particularly in terms of strength, shooting prowess, CCW, etc.
In this article, the G19’s superiority over the G44 has been thoroughly examined. so pay attention!

What are the features that separate the Glock 44 and Glock 19?

Recoil:

The trigger on the Glock 44 and Glock 19 feels similar to one another. Naturally, the G44 has less recoil, but not significantly less. Despite firing.22-caliber rounds, the Glock modified G44 has a substantial amount of recoil.
Accuracy is identical. If you can hit it with G44, you can hit it with G19. The G19 has greater handling of recoil, in my opinion.
There is a noticeable difference in recoil between the 147-grain Golden Sabers and the 115-grain FMJs when fired from a Glock 19. It’s okay to shoot the 115 grains. However, firing the 147 grains was remarkably smooth. Glock 19 VS Glock 44

Caliber:

The chamber of the Glock 19 is 9mm. There is a.22lr chamber in the Glock 44. You’re actually considering buying a loaded 22- or 9-millimeter rifle. You are the only one who can decide that; it relies on a few things.
While 9mm is the most often used caliber, 22lr isn’t typically thought of as a self-defense round. Therefore, the Glock 19 is what you need for self-defense.
Additionally, remember that the Glock 44 isn’t actually a competitive handgun. Because it won’t be as accurate as a genuine 22-competition gun, you are only able to plink.

Trigger:

The Glock 44’s trigger is quicker, sharper, and more comfortable. They felt a little hefty at first, but with wear they become lighter.
Both the Glock 19 and Glock 44 triggers are constructed of polymer. They also have a pull of 5.5–6 pounds when you press them.
The G19’s trigger, however, might be a little too soft. Some people might think the trigger is awful since it travels so far and feels crunchy.

Weight:

The Glock 44 is heavier in weight. This is mostly because the slide is made of steel and polymer.
The Glock 19 slide, on the other hand, is primarily made of polymer. Compared to the 14 ounces of the G44, the gun weights only 6 ounces.
Therefore, it is important to consider weight when exercising, especially.

Shooting:

The Glock 44 will give you unreliable shots if you fire six shots in a row quickly. This is to be expected given the 22’s lack of recoil. It does provide evidence in favor of employing the 22 in a defensive situation.
With the exception of the initial ammo-related jam, the Glock 19 runs flawlessly. Probably after the first shot, it will fail. Later, the firing of the entire 300–350 rounds at the range is rather fluid.
Both shoot quite well, however G19 may be a better shooter. Dry firing might be required because the Glock 19 will be utilized for self-defense. The 44’s biggest disadvantage, according to some, is its small weight, which makes firing accurately difficult.

Extraction Issues:

Most Glock 44 owners are either unaware of or have never had “jam” problems with their pistols. And the shooting accuracy of these weapons is decent.
The Gen 4 Glock 19 will, nevertheless, sporadically extract some “stove pipes.” There were recoil spring issues with the Gen 4’s first release, which caused some “stove pipe” problems. After the spring was recalled, owners received new springs.
So the Glock 44 wins the round in terms of jamming concerns.

Accuracy:

With the following ammunition, the Glock 44 can be put through accuracy tests: Winchester M22, Federal Punch (which has a heavier kick and obvious blast), CCI standard velocity, and Winchester Super X. Typically, the first 60 rounds are remarkable and don’t require sight adjustments. However, Winchester M22 ammunition could pose a small risk.
The Glock 19 pistol is dependable yet very inaccurate. Winchester and Remington tests using factory ammo confirm this. They often average 3 to 4 groups at 25 yards off the bench on a good day. They may open up to five groups on poor days.
In this case, the G44 triumphs.

 

Buy Glock 19

Which Should I Pick: The Glock 19 or the Glock 44?

The only difference between the Glock 19 and Glock 44 is the weight of the Glock 44 due to the steel slide. A fantastic 9mm starter gun is the Glock 19.

As was previously mentioned, the Glock 19 is less accurate than the Glock 44 and has a higher rate of FTF and FTE problems. However, it does provide you with the dependability you need for self-defense.

The 9mm Glock is unquestionably more dependable. But using G22 ammunition, the Glock 44 can be very dependable.
There don’t appear to be many mag extensions for the Glock 44, though. But compared to G19s, loading and unloading factory magazines is smoother.

Personally, I believe the G19 to be superior—you’ll almost certainly never make a mistake choosing it as your first weapon.

FAQs: Frequently Asked Questions

Can a Glock 19 be converted to a Glock 44?

You may purchase a handgun that is highly reliable and effective by buying a Glock 19. An Advantage Arms 22lr conversion kit is available for an extra $200. In comparison to the OEM model, you will be able to shoot the Glock 44’s 22lr more accurately thanks to this.

Can a Glock 44 be transformed into a G19?

No. The G44’s locking block stops the 9mm from fitting. The 22LR slide cannot be used with the 9mm pistol because it would likely explode.

How can the Glock 44 avoid trailing its bullets?

Look at the area around the recessed crown of the barrel. Significant lead accumulation might exist. This could result in the bullet dragging to one side or the other as it exits the barrel.

Watch the lead bits emerge from the barrel as you repeatedly brush and soak with Hoppes #9, scrape the area surrounding the entrance with a pointy plastic edge, then spray foaming bore cleaner.

Lead buildup will appear more silvery or shiny if you use a bore brush or scratch to remove it, giving the impression that the region is clean.

But occasionally keep going until the lead stops flowing out.

 Summary

I would suggest a Glock 19. One that I own is a well-made, accurate gun that is the ideal size. The G44, however, is considerably less expensive than the G19. Overall, reading this essay should help you make a final choice with confidence. Wish you luck finding a better Glock! 

Buy Glock 19

Glock 17L VS Glock 34

Glock 17L VS Glock 34

Glock 17L VS Glock 34Glock 17L VS Glock 34Buy Glock 17

Glock 17L VS Glock 34

The most well-known “gun wizard” company in popular culture has to be Glock. Its 17L and 34 models may be less well-known, but the company is renowned for creating dependable and accurate pistols. The shooters, though, adore them!
Although there are numerous similarities between the two pistols, there are also some significant variances that may make one of the two better suited for a certain application than the other. The barrel length, weight, magazine capacity, sights, and most crucially – the trigger – are the distinguishing characteristics.
You may find out everything there is to know about the distinctions between the Glock 17L and Glock 34 in the sections that follow.

The Differences Between Glock 17L Vs Glock 34 Gun Models?

When comparing the two firearms, you can find minor variations in their specifications and characteristics along with a significant price and market demand gap.
This section should help you with that conundrum:

 Length of the barrel and slide:

The Glock 17L and Glock 34 have a same frame. The 17L barrel and slide are longer and squarer in the front, which is the only distinguishing difference. The sliding nose of the 34 also has side bevels.
The square-nosed slide and 6.02-inch barrel of the Glock 17L are the same size. The Glock 34, on the other hand, features a 5.31-inch barrel and a slide with a tapered muzzle end. Does that additional.7′′ really matter that much? Perhaps not.

Shooters claim that they typically pick the longer, heavier 17L accounts for better hand balance. The 34 is superior as a practical defense weapon, though.
More material is removed from the 17L slide. It is lighter as well.
The G34’s tapered slide nose, however, making reholstering simpler and more comfortable.

Weight:

The 17L is listed as having a less empty weight on the Glock website than the 17 and 34. But for some reason, the 17L seems to hold more 9mm bullets. Definitely magic!
However, the Glock 17L feels and weighs about 26 ounces when empty of a magazine. Without a magazine, the Glock 34 weighs about 25.06 ounces. The Glock 17L is therefore a little heavier than the Glock 34 as a result of this.
The two models’ weight differences are not enough to have an impact on shooting performance. But the 17L might experience less recoil as a result. and offer a shooting platform that is more steady.

Trigger:

The triggers on the 34 and 17L are often much nicer out of the box. Additionally, the slide has the weight-reduction cutout.
The triggers of the Glock 17L Gen 3s, according to several users, are better. 

The break on the Glock 17L trigger is sharper and more distinct. Additionally, it features a somewhat quicker reset than the Glock 34’s trigger, which could be helpful in situations when shooting is competitive.

Sights:

A wider field of vision is always preferable. The Glock 17L should therefore provide the shooter with slightly better accuracy. A 17L can be double-tapped while remaining on target.
The Glock 34’s stock sights, however, are usually rated favorably by users. Users prefer the adjustable rear sight and white-dot front sight more.
There are several different aftermarket sight options available for the Glock 17L and Glock 34. Some owners prefer to swap the stock sights on their Glock 17L for fiber optic or night sights for improved visibility in low light situations. Similar to this, some Glock 34 owners favor competition sights like the Trijicon HD XR front sight or the Dawson Precision adjustable rear sight.

Availability:

In 1988, the Glock 17L version debuted. The Glock 17L has currently been discontinued. However, in some extreme circumstances, there is frequently very little production.
There are still Glock 34s being made today. The majority of Glock 34s are Gen 4, and Gen 3 17Ls. Only the Gen 3 version of the Glock 17L is available, and those are hard to come by.

Recoil Spring:

The 17L would likely feel slightly different in terms of recoil. Other than that, the recoil spring assembly is the identical for both the Glock 17L and Glock 34. It is made up of a guide rod, a recoil spring, and an end cap made of plastic.
For both the 17L and the 34, the spring weight and assembly are the same. The same 17lb spring and polymer caught recoil rod are standard equipment for all of them. Despite having heavier slides than the 34, the 17L.

This explains why there is a tiny shift in recoil. Furthermore, the recoil springs for either rifle should not be less than 15 lbs ISMI or 14 lbs Wolfe.

Accuracy:

In actuality, the Glock 34 is more accurate than the Glock 17L. Just to clarify, accuracy is not primarily determined by barrel length.
Ammunition is just one of many other elements. For instance, the Glock 17L barrel’s “lockup” is looser than that of the G34.
For five shots at 25 yards, the best Glock 17L shots with ammunition like frangible bullets travel roughly 1-3/4′′. However, this rises with ammunition such as 115 gr FMJ Blazer (Aluminum case), 115 gr FMJ Winchester (White Box), etc.
At 75 inches, a Gen 5 Glock 34 should be able to fire 5 bullets in a group no bigger than 3 inches.

Range:

The Glock 17L’s effective range can typically be estimated to be 50 meters (55 yards). This is for scenarios involving self-defense or target shooting. It appears that the Glock 34’s greatest effective range is 50 meters.
The range, though, is not a set sum. and could alter based on the gun’s modifications.

Safety:

The safety features of the Glock 17L and Glock 34 are comparable. This covers drop safety, trigger safety, and firing pin safety.
These features increase safety when handling the firearm and help prevent accidental firing.

 

Buy Glock 17

Comparing the prices of the Glock 17L and Glock 34

The suggested retail price for a new Glock 17L in September 2021 will be roughly $749. A new Glock 34 was priced at about $649 at recommended retail.
The Glock 17L retails for $1,050 right now on Guns.com. Offline, however, the worth is approximately $935.44 new and $901.09 used. The Glock 34 is worth $499.52 when it is used and $585.95 when it is new.
Local taxes, shipping costs, and other expenses could affect the real costs. However, a Glock 17L is much more expensive than a Glock 34.

 
 

Buy Glock 17

Glock 34 or 17L: which is the fan favorite?

It’s really individualized. Many people would choose the 17Ls over the 34. They might sense that the 34 is a little off-balance. since the 17L’s additional weight could cause some shifting.
Some people favor the 17L because it is so uncommon—it is the unicorn. Everyone at the range seems to have a 34, but a 17L is never seen.
The Glock 17L’s sight radius is also more difficult to find. The longer sight radius and additional weight are advantages in theory, but they also result in slower swing and cycle times.

The Glock 17L’s proportions, meanwhile, may annoy certain users. In these situations, the issue of improper feeding and cycling is widespread. 

The Glock 17L is ultimately favoured by shooters and for tactical applications.

FAQs: Glock 17L vs. Glock 34

Can I use the Glock 17L and Glock 34 in IDPA and USPSA?

Since the majority of shots in USPSA and IDPA are made between 3 and 7 yards away, it is of little advantage when using an action pistol.

Do the Glock 17L and 34 have a MOS variant?

The G34 is available as a MOS model, while the G17L is not.

Are the barrels on the Glock 17L ported?

Ported barrels are only found on Generation 1 Glock 17L variants.

Which Glock has a higher resale value, the 17L or the 34?

The Glock 17L is more valuable when resold than the Glock 34.

 

Buy Glock 17

Glock 23 review

Glock 23 review

Glock 23 reviewGlock 23 reviewBuy Glock 23

Glock 23 Review

The well-known, frequently praised Glock 23.40 S&W semi-auto pistol is the subject of this review.  But this review is not like others.  Just though you have read every review of every G23 generation doesn’t imply you have experienced everything this weapon has to offer.
With this in-depth analysis of an idea that manifests itself as a big achievement in the Glock 23 handgun, we aim to contribute something.

Glock 23 Background

The majority of this assessment will relate to the Generation 3 Glock 23, which strikes an excellent balance between Glock’s past and present.
It fits a lot of the features that Glock pistols have, in my opinion, perfectly.
The Glock 23 Generation 3 was almost eight years old when it was released in 1998.  After decades of the.38 Special, the.40 S&W was remained the law enforcement favorite.
And then, for the next six years, the majority of law enforcement personnel dominated with 9mm in their holsters.
Federal and local law enforcement organizations have already used the.40 S&W to grab market share from the 9mm for nearly half a decade.

The officer demographics, which were shifting to include more women and wider applicant pools, weren’t necessarily best served by full-sized firearms.
The G22/G23 (full and compact sized handguns, respectively) have dominated the market since the semi-auto pistol’s initial coming out celebration, surpassing all other firearms except the G17G/19.  This included the S&W stainless steel weapons, which were quite well represented. glock 23 price

Buy Glock 48

Glock G Series

What made the Glock G series weapons so unique?

They carried a lot of ammunition that, when it came down to it, balanced well with a full magazine. They were also lightweight, bulletproof, and easy to handle in terms of recoil.  One may argue that the Glock 23 achieved more to establish the Glock brand as the standard for police enforcement than its even more well-known brothers, the 9mm-based 17/19.
It was a high capacity, approachable pistol in the most popular LE-available caliber at the time, and it just kept working. Additionally, it was reasonably priced and had support from the other successful Glock predecessors.

However, the G23 served as a catalyst for the LE community by introducing the concept of duty gun turnover depending on important variables, in this case, the.40S&W cartridge.
Despite a law enforcement return to the 9mm nearly universally, new, fascinating handguns from competing manufacturers, as well as numerous generational improvements to the Glock pistols, the 23 continues to have a significant sales volume today.  Evidence of its durability and the fact that Glock got the design right so many years ago.

Glock 23 Variants 

The GEN3 is exclusively offered on the frame in Black and, in some uncommon instances, Flat Dark Earth.  Specific retail and online stores carry GEN4 in exclusive colors like Grey, Black, Flat Dark Earth, and Olive Drab.
Additionally, GEN5 is available in Exclusive hues like Grey, Black, Flat Dark Earth, Coyote Tan, and Olive Drab at several retail and online stores.
With intriguing color schemes, many wholesalers are now also selling cerakoted pistols as new items.
You can also purchase specialized cutaway and red-handled replicas, which are excellent for students learning how guns work or for adjusting to the weight of a pistol.
The Glock 23 – Our Opinion

The Generation 3 Glock is like the Used Rolex Submariner, I’m simply going to say it. A fresh version with crisper features and a better surface finish will cost roughly the same as a highly used one, but you probably won’t get the same usability and industry-beating longevity out of it.
The third generation Glock pistol is unquestionably the best balance of features and practical usage of any pistol generation produced by any manufacturer.  There is simply no finer balance between “beat it up” and “don’t care about it” that still allows you to rely on it to always function and fire straight.

The Generation 4 and Generation 5 Glocks are in perfect working order.  They also have excellent firearms. However, something about the Glock Gen 3’s somewhat unkempt, modest lines makes me think that this was the last time Glock gave much thought to creating a really global product.
The majority of the adjustments made to the Glock series now are trying to suit market demand or saving money on universal tooling.  The finger grooves and vintage stippling are appealing to me. I appreciate the fixed pistol grip with the “awkward” angle and the lanyard loop.  This is coming from a man who also enjoys carrying a 1911.45 caliber in condition one.
The fact that the rifle operates without any additional components pleases me. The slide stop, however, is not a factory option, as you can see if you look closely. When I purchased it, that was present. It has a low enough profile that I didn’t choose to swap it out for an OEM model from the manufacturer.

Economics

The 1911 has better ergonomics, though. What are the pistol ergos? But I can shoot this rifle one-handed at 25 yards in under 2 inches all day.
I don’t have to worry too much about what I feed it because it will digest anything, but if I’m trying to be kind, I don’t shoot non-jacketed lead rounds down the barrel. It can handle it; however, after approximately 25 rounds you won’t have the same precision, and cleanup is not enjoyable.

The gun’s total worth is unsurpassed. Almost everywhere, with the possible exception of California, you can buy fully functional used models for under $400 that are in perfect working condition (look at the pics of this pistol with probably close to 90k rounds through it; it virtually looks new). Even in California, they occasionally turn up for sale in the $300-400 range.
The factory night sights from Glock are far superior to the original plastic sights, even though they aren’t strategically better than a newer model. See if you can get one with metal sights; they simply work better, is my advice. Particularly if you have the dovetail milled-slide or screw-in front sight variants rather than the plastic factory sights.

In comparison to the hottest 9mm defensive rounds, the.40 S&W has a respectable recoil profile and good overall stopping power. If you’re still a lover of the.40S&W, you won’t have any issues with the speed and power that the Gen 3’s regular Glock barrel produces.

Customization

This is a rifle that allows you to tweak it without feeling like you are destroying a factory masterpiece because there are so many aftermarket alternatives for it and you can even make some customizing at home. With some clever taping and sandpaper work, the finger grooves on the front strap can be removed. The stippling can be experimented with using several simple tools from Harbor Freight. What do you intend to do, make it look worse?
Glock is aware that only a mother or a diehard devotee can appreciate its appearance. The G series handguns are not particularly attractive to us. It all comes down to their dependability and toughness.

Durability

I have owned other Glocks in addition to the G23. I have a Glock 17 that has been fired more than 200k times. Two guide rods and a firing pin are its only wartime casualties.
I completely anticipate that this Glock 23 will travel the same distance, and, God willing, it will be just as difficult during the second 100 kilometers as it was during the first. Throughout the years, I’ve also owned three more Glocks that I don’t now own. They were all great CCW partners.

Capacity

With a few magazine purchases, the manufacturing capacity of 13 rounds (10 rounds in states like California and New Jersey, etc.) is sufficient to minimize downtime on the range. Also available are magazines with a larger capacity.

The capacity also gives you the peace of mind to carry it covertly, which is something this tiny frame is excellent for. The concealability of this gun is endless on anyone weighing more than 165 lbs. Finding, handling, and stopping a threat in a handbag or specialized holster is just as simple as doing so when wearing the object in a concealing position around your waist.
The Glock 23 Gen 3 is unique in that it can be handled by anyone, regardless of hand size, body type, or height. those who dislike the loud thud of the gun. It appears that this is a good compromise between the muzzle snap of the 9mm and the 45ACP. Sure, it’s still a little sharp and has some recoil, but it’s manageable 

And despite the fact that the adage about polymer frames dampening part of the recoil seems to be only promotional material, I actually feel powerless to refute it. Simply put, it seems to go well for everybody who holds onto it.
I made a comparison between a Rolex and the Glock Gen 3 G23 at the outset of this section. In spite of the fact that I never claimed it was as attractive as, say, a Rolex Submariner from the 1990s to 2002 (like the Black Bezel Model #14060), I wouldn’t be surprised if you felt the same way about this older generation model as the watch connoisseur does about that Submariner.

Buy Glock 48

Glock 23 Starter Pack

If after reading this post you decide to purchase a Glock 23, we won’t hold it against you. Heck, we might even take another one. But if you’re going to do that, you should at least be prepared.

G23 Mags are available at Guns.com.Gloryfire Universal Cleaning Kit for Guns on AmazonFor the best options, check out our evaluation of the Best Shooting Glasses.Finding the appropriate ear protection for you can be found in our page on hearing protection.Amazon has the Vaultek Lifepod Waterproof Travel Case. 

Optimal Ammunition for a Glock 23

 Make sure you are buying exactly what you think you are when buying your ammunition. You must purchase ammunition designed for that use if you plan to use the range for target practice and ammunition consumption. To ensure that your Glock and you always have the best possible stopping power and efficiency, make sure to replace your mags with functional ammunition thereafter.

Buy Glock 48

Glock 48 review

Glock 48 review

Glock 48 reviewGlock 48 reviewBuy Glock 48

Glock 48 Review

The newest pistol model made by Glock is the Glock 48. It was introduced together with the Glock 43X, a cross between the brand-new Glock 48 and the somewhat smaller and more aged Glock 43. Want to know more? Read the entire review of the Glock 48.

For a while now, people have been demanding a thin mid/full-size 9mm Glock. I’m one of them, I’ll admit it.

But now that it’s here, I’m questioning whether Glock ought to have known better than to pay attention to me. I received the Glock 48 just as requested. a compact Glock 19. But now that I can contrast it with the Glock 43X, I believe I prefer the Glock 43X slightly (at least for CCW).

Glock 48 Background

The most widely used Glock pistol is by far the Glock 19. In fact, it is the weapon I advocate for the most as a general-purpose handgun.
The ratio of reliability to size is excellent.
It is just big enough to function as a duty gun and be used seriously on the range. It is just the right size to be reasonably concealed.
Since the Glock 19 is so common, even though it isn’t truly the “best” in any particular category, if I could only own one handgun, that would definitely be it.

It runs like a tank and I can find parts and extras for it anywhere.

Apart from the plastic/junk sights it comes with, the Glock 19’s biggest drawback as a concealed carry weapon is that it is just a little bit too bulky to be effectively concealed. Yes, it is possible, but for concealed carry, having a single-stack/slimmer Glock 19 looked preferable.

Glock released a single-stack concealed carry pistol a few years back, however they missed the mark and released it in 380 ACP rather than 9mm. Actually, they were probably geniuses since everyone purchased the Glock 42 in 380 ACP for a year before the Glock 43 in 9mm was introduced and consumers were forced to buy a brand-new weapon. I might have had some insider knowledge that allowed me to delay buying my Glock 43. A compact 9mm Glock looked to be what we were looking for with the Glock 43. The issue with it was that the magazine only carried six bullets, making it ineffective for use. Yikes! With a 5-round capacity, my Smith & Wesson J-Frame revolver—which is lighter and possibly easier to carry—began to sound appealing once more. Glock was performing well.until Sig introduced the Sig P365. Saying that the Sig P365 reinvented what a concealed carry pistol should be is not an exaggeration. The Sig P365 was TINY, had a 12-round magazine capacity, an excellent trigger, excellent sights, and a fantastic hand feel. Glock was forced to react. Enter the Glock 48 and the Glock 43X, a hybrid of the Glock 48 and the 43. 

Buy Glock 48

What is the Glock 48

Since its release about a year ago, the Glock 48 has attracted a good deal of interest and popularity. The G48 is not particularly innovative; it is essentially a single-stack G19 that, depending on how you look at it, either makes some sense or none at all.
 I frequently carry the G43 while at home and use it for training, so I’m accustomed to the grip, handling, and manipulation of the Glock single-stack handgun platform. Although the G48 has a longer slide and a higher grip than the G43, it also has a somewhat thicker frame, giving it a more robust feel and shooting feel.

 The only handguns I am interested in are those that I carry frequently, primarily concealed, as I am neither an active warfighter nor a law enforcement officer. Since this handgun is exactly the same length, height, and thickness as the G19—despite being a single stack—I must admit that at first it was difficult for me to justify owning one. Therefore, I have long noted that if you can carry a G48, you can also carry the G19, which is a much superior option. But after giving it some serious thought, I’ve come to the conclusion that there are good reasons to own and carry the G48. So, after shooting this single-stack pistol for a while, I’ll discuss some ideas you might want to think about.

Glock 48: Our Opinion

At the 2019 SHOT Show, we had the opportunity to test out the Glock 48, and we have to say that we were pleasantly surprised by how much we enjoyed it.

The Glock 48 can best be described as a Glock 19s, which is by far the simplest way to do so. Why? That much is obvious: simply because it is a compact Glock 19.
Does that justify our recommendation of it?
Because it was a Glock, everyone at the range could depend on the gun, and it was precise enough for CCW.
Since the Glock 43x and this rifle are quite similar, their reviews will be very comparable. Why did my initial “meh” change to “oh, these are pretty cool!”?
There is one major explanation and a few minor ones:

The Glock 48 Has the Perfect Grip

When I initially held the Glock 48 and fired it at the range, it felt comfortable but skinnier (go figure).
Being a self-described Glock guy, I discovered that it was more simpler to shoot and use than the smaller Glock 43. The Glock 48’s grip appeared to be the ideal balancing act between being as large for grip/operation and as compact as feasible for concealability. Well done, Glock.
The Glock 43x grip is identical to the Glock 48 grip, thus what I loved about it is also what I liked about it.

Serrations on the slide and the front

Like Apple, Glock is renowned for releasing little improvements to their devices.
Consumers may find this frustrating, but these businesses are far more skilled at producing and marketing goods than I am. Both must generate high-quality items, thus it must function.
In fact, the Glock/Apple parallel makes sense now that I think about it. Other firms will release new features on their products more quickly than Glock/Apple, but whenever Glock/Apple catch up, the features tend to be implemented cleverly in an outcome that has been thoroughly tested and created.

Both businesses also have fervent customers who eagerly await every new product release, even if it just offers small enhancements over earlier models.
They both create items that are roughly square and have somewhat rounded corners.
Regarding the forward sliding serrations again:
It just wouldn’t be the same if Glock left them off this gun like they have for most earlier versions. Glock has finally started incorporating them on their handguns, and they are a wonderful feature on the G43X.
Reliability

Glock familiarities

There is merit in comfort and familiarity.
The Glock 48 feels like a Glock when you hold it in your hands. That may be a drawback for some, but for someone like me who are accustomed to Glocks, it’s a useful feature.
THOUSANDS of bullets have been fired via my Glocks. When I take up the G48, all that practice and training will still be useful.
The grip angle is comfortable, the controls are where I anticipate them to be, and the trigger has a reliable reset. 

Accuracy

Although I didn’t shoot the Glock 48 as well as I did the smaller G43x, it was still accurate enough.
Fairness dictates that the Glock 48 came with the plastic factory sights, but the Glock 43x had improved sights (both variants are available here).

The following are some aspects of the G48 that we didn’t particularly like:
It was thinner than a Glock 19 and had a better overall grip size than the Glock 43, but it was still a little bit of a Glock-brick. Our acculturation to more ergonomically shaped firearms has begun.
Strangely, the slimline grip went against how I’m used to holding things. A tight grip in my hands caused the Glock 48 to try to slide or twist slightly to the left. The larger (squarer) Glock grips on the larger versions seem to keep alignment better in my hand for some reason.
Although it may seem like a minor complaint over a minor grip, we want to make sure that you understand this.

Second, and this is just a matter of choice, but I believe the Glock 48 looks cheap because of the silver slide. Your results may differ.
Thirdly, there is no rail for lights or other attachments. I understand that because it is smaller than a typical Glock, standard Glock lights won’t fit. But by excluding a rail, they prevent light makers from creating something for this novel firearm.
Our experience indicates that concealed carry will be quite popular. This indicates that it will be used or designed for defense shooting, which frequently occurs at night. Consequently, some people will desire a light.

Final Thoughts

One of those guns where you’ll probably know whether to buy it or not is this one. You either have been waiting or looking for the Glock 48, or you’re like us and can’t really find anything wrong with it but don’t really see a large need for it either.

Of course, there is one significant exception: If your state only allows you to carry 10 rounds, this could be an excellent option for you. For the reduction in capacity, it is true that it is not significantly smaller than a Glock 19, but since you can only carry 10 rounds anyhow, why carry extra weight? See our comparison of the Glock 48 and Glock 19 below.

Clearly a capable CCW option in a mid-size gun, the Glock 48. If you like the Glock brand and are searching for a new concealed carry weapon, this might be it!

 

Buy Glock 48

Glock 48 VS Glock 19

The two primary differences between the Glock 19 and the Glock 48 are the width and capacity. The Glock 48 adds a silver slide and forward cocking serrations.
As you can see below, the Gen 4 Glock 19 is 1.26 inches wide, while the Glock 48 is 1.11 inches wide. The Glock 48 only has enough for ten 9mm bullets, while the Glock 19 typically stores fifteen.
So let’s compare some math…
To save 0.16 inches in breadth, you must forfeit 1/3 of your magazine’s capacity. Yes, in a nutshell, that’s it. Is it worthwhile to reduce the number of rounds from 15 to 10 (having only 66% of the capacity) in order to save 12% of the width? Glock sincerely hopes you agree.

Sadly, giving up a significant portion of your ammunition is not the only concession.
The Glock 19 is by far the most widely used Glock pistol, as was already mentioned. There probably isn’t another handgun made by any company for which you can find more holsters, magazines, parts, and accessories.
In order to save 0.16 inches, you must therefore sacrifice 33% of your capacity and spend money on new holsters, magazines, etc. while also waiting for them to be made available.
If you’re just getting started and don’t yet have a G19, perhaps this would be a nice place to start?
However, switching to a Glock 48 right away if you’ve already invested in Glock 19 parts and accessories might not be the best course of action (unless you want one, in which case that’s more than enough of a justification). Instead, you might want to have a look at the Glock 43x, which has a smaller and lighter package while offering the same capacity and slimmer profile as this Glock 48.

 

Buy Glock 48

Best sights for the Glock 48

If you’re unfamiliar with a Glock, you should learn about the ONE thing it performs poorly. SIGHTS! They probably put on the worst sights they can because they think you’re going to get new ones anyhow. So that you may make an informed decision, we have included a few options below.

 Trijicon HD Tritiums are the best aftermarket sights for the Glock 48 in our opinion. It is a traditional U-shaped front and rear blade sight assembly with bright green tritium lights built into it. The front hook on the lead sight’s end is what distinguishes these particular sights from others. The purpose of that hook is to facilitate one-handed slide emergencies.

The Ameriglo Agent Night Sights are a tough choice if you’re searching for an incredible set of sights you can use in any situation. They are essentially routine issues from the US Marshal Service and FBI. These are green tritium sights that are incredibly simple to sight with because of the front’s brilliant orange ring.

GLOCK 48 CARE INSTRUCTIONS

Most people agree that Glocks are among, if not THE, most trustworthy pistols on the market. But carelessness and poor handling might cause that reliability standard to swiftly deteriorate. An excellent job is done by Alans Firearms in demonstrating how to take this pistol apart, clean and lube it, then reassemble it safely.

THE BEST GLOCK 48 HOLSTERS

I’ll say it out loud so that everyone in the back can hear it.If you plan to carry a hidden weapon, you must have a suitable holster. It is improper to simply shove a gun down the front of your jeans. Having saying that, there are several excellent holster choices available. Let’s look at a couple of them.

CLASSIC LITE SHOULDER HOLSTER BY GALCO

Do you prefer wearing pants with an inside or outside waistband? If neither of those questions apply to you, you might want to have a look at this Galco shoulder holster. For those who desire the most comfort and mobility while carrying a single Glock 48, this is a fantastic alternative.
 

HOLSTER FOR FOBUS EVOLUTION

Sometimes using a straightforward paddle holster is the ideal method of carrying. And among the greatest currently available is the Fobus Evolution. It is constructed with a micro paddle that has a rubberized backing for maximum comfort and stability. To ensure a snug, secure fit without being overly tight or loose, the Evolution also features an adjustment screw with passive retention.

Buy Glock 48

Glock 27 review

Glock 27 review

Glock 27 reviewGlock 27 reviewBuy Glock 27 gen 5

Glock 27 Review

The Glock 27 review in 40 S&W joins the Gen5 family as a new member. This compact, lightweight, powerful handgun has been chosen as the official backup weapon by so many U.S. law enforcement agencies. The innovative Gen5 design upgrades have been incorporated to it. This variant features a nDLC finish thanks to the use of Gen5 technology, a flared magazine well, the tried-and-true GLOCK Marksman barrel (GMB), and an ambidextrous slide stop lever. The G27 Gen5’s subcompact frame, which is adjustable like the Gen4 model’s, has the modular backstrap and beavertail system (MBS) and a reversible magazine catch to accommodate left- and right-handed users. Remarkably wider than models from the previous generation, the slide of the 40 S&W Gen5 is. 

Glock 27 Background

The subcompact member of the.40 S&W family is the Glock 27. The G22 (full size), G23 (compact), G24 (rare model the size of a G17L), and G35 (5.3 inch barrel on a full size frame) make up the rest of that family. As long as the magazine is longer than the gun’s grip, all of those models can use the same magazines. This indicates that while the compact can fit a full-size magazine, the opposite is not true. The G27 features the shortest grip, allowing it to accept either the 13-, 15-, or 22-round.40 magazines in addition to the usual 9-round magazine. Although they appear a little goofy dangling out of the grip, they are fully functional.

One of the main benefits of the Glock 27 for law enforcement usage was its magazine compatibility. For many years, a Glock 22 served as the de facto standard police pistol in the United States. Officers would carry a number of extra magazines in addition to their service weapon. The ability to use those magazines was one of the best features of a G27 backup gun, which is typically worn in an ankle holster. Since the backup gun didn’t require any special extra magazines, this reduced total weight.

However, the.40 S&W’s reign of terror is now over. Due to the.40’s lower capacity and greater recoil than the 9mm, while having extremely identical terminal ballistics, fewer and fewer shooters are opting for it.

 

Buy Glock 19 gen 5

GLOCK 27 Models and Variations

The Glock 27 comes in three different generations. The most popular Gen 5 is the newest and best. Only for law enforcement contracts, Generation 4 models are still widely available in used form, and there is still plenty of new old stock on dealer shelves. Californians can purchase Gen 3 models because of the state’s handgun roster regulations. The only color that is typically offered is black, though several cosmetic variations have also been made.

Glock 27: Our Opinion

Shooting the Glock 27 makes me think of the phrase “squirrely.” Reduced recoil is one of the 9mm’s main advantages over the.40 S&W. The G27 makes the increased recoil in the.40 very, very clear. The stout recoil would occasionally cause me to flinch. But it was manageable when I did my bit and tightly held on. You can tell if your technique is shoddy with this rifle.

The ejection on this gun is the most bothersome feature. No matter what ammunition I choose, it always manages to hit me in the face with the brass. When using this gun on the shooting line, be careful to use eye protection.

Aftermarket Assistance

The Glock 27’s trigger is a typical Glock component. You probably have a good sense of how this one feels if you’ve tried the others. It does not awe, but it is sufficient for defensive use. However, if you chose to modify the trigger, there are several aftermarket options available. Just be aware that the quantity of aftermarket components added to a Glock decreases its reliability. A firearm with more aftermarket components is more likely to have reliability problems.

Ergonomics

The G27’s ergonomics are not outstanding. It feels just like a regular-thickness Glock with the grip and barrel removed. It appears to be as thick and tall in the hand. The grip is also relatively short, making it impossible for the pinky of the majority of shooters to touch the rifle. With the Glock 27, extended magazines or magazine floorplates with a pinky extension are a great idea. It is uncomfortable to hold a subcompact.40 with only two fingers. 

Reliability

The quality and dependability of every Glock are unmatched. The G27 upholds the family legacy. The way it feels in your hands might not make you grin, but it will function when you need it. It uses ammunition without discrimination as well. The G27 will consume almost any ammunition supplied to it.

Accuracy

Nobody uses a Glock 27 in target pistol competitions for no reason. lousy ergonomics, a generic Glock trigger, and strong recoil combine to create a lousy target gun. This is not to suggest that it is innately imprecise, just that it is not a gun that is particularly concerned with accuracy at bullseye targets. As quickly as a shooter is able, shots will be fired at a silhouette target. When fired with more intention, it can shoot respectable groupings. But rather than a gun that makes shooting simpler than it otherwise would be, this is a gun where accuracy is still achievable despite the pistol’s other features.

Value

The G27’s value proposition has some subtleties. A subcompact.40 S&W purchase at full retail cost is debatable. The $540 price point appears excessive because Glock insists on employing cheap plastic sights. However, there are a lot of inexpensive used Glock 27s available. One reason for the low demand is that the.40 S&W is no longer as popular as it once was.

 The visuals are my other complaint about the price point. The G27’s inexpensive plastic sights are identical to those on other Glocks. The best course of action is to switch out the sights for at least metal ones, usually metal night sights. The thin plastic sights frequently break when being operated with one hand. They have also been known to become worn out after numerous holster draws. Better sights should be seen as a necessary upgrade, similar to a pinky extension for the stock magazine. 

Final Thoughts

Overall, the Glock 27 achieves its goals. It makes the ideal handgun for a full-size backup.Glock 40 caliber. On its own, it is a useful concealed pistol, but other choices available in the market now outperform it.

Buy Glock 19 gen 5

Glock 27 photo Review

One of my all-time favorite handguns is the GLOCK 27 subcompact.40.  With the exception of some jams from worn-out magazines, it handles like a champ and has never caused me any issues.  The GLOCK 27 is a fantastic little backup gun that can deliver precise fire downrange in an emergency!  

Since then, Glock has added the Glock 42 and Glock 43 to its lineup (see our written review here). Both the Glock 42 and the Glock 43 are single stack pistols that fire 9mm and.380 rounds, respectively. When the 43 was produced, there was some controversy because many customers had already bought the Glock 42.380. Some believed it to be a scheme by Glock to sell additional weapons. Imagine that.
The Fix

The visuals are my other complaint about the price point. The G27’s inexpensive plastic sights are identical to those on other Glocks. The best course of action is to switch out the sights for at least metal ones, usually metal night sights. The thin plastic sights frequently break when being operated with one hand. They have also been known to become worn out after numerous holster draws. Better sights should be seen as a necessary upgrade, similar to a pinky extension for the stock magazine.

 

Buy Glock 19 gen 5

Glock 27 Starter Pack

If you’re serious about buying a Glock, you should probably pick up a few other items—if you don’t already have them, of course.

Sights

The stock Glock sights do function. Yes, you should swap them out as soon as you can. Check out our review of our favorite Glock sights

Magazines

Any gun you possess needs spare magazines, unless you enjoy wasting a lot of time reloading. Visit Brownells to purchase some Glock 27 OEM magazines.  Gun Cleaning Kit

To keep your firearm reliable, you must maintain it. For the gun cleaning supplies you’ll need to keep your handgun in great condition, check out our entire page on the subject.  

Eye Protection

It should go without saying that you should spend money on good shooting glasses. You’re going to have a miserable day if one piece of brass gets lost. Take a look at our suggestions for the top shooting glasses!

Hearing Protection

It should go without saying that you should spend money on good shooting glasses. You’re going to have a miserable day if one piece of brass gets lost. Take a look at our suggestions for the top shooting glasses!

Buy Glock 19 gen 5

Glock 19 gen 4 slide

Glock 19 gen 5 problems

Glock 19 gen 4 slideGlock 19 gen 4 slideBuy Glock 19 gen 5

Glock 19 gen 4 slide

Glock handguns are used by people and organizations all over the world because of their dependable performance under stress and in challenging circumstances. The Brownells RMR Glock19 Gen 4 slide the shooter’s capacity to control the slide and hit the target precisely in certain circumstances. To manipulate the slide to examine the chamber or unclog a blockage, it has characteristic, wraparound front cocking serrations. 

We’ll be honest: the serrations also merely have a cool appearance. With the integrated attachment for the well-liked Trijicon RMR red dot sight and some Holosun sights (see list below), the RMR Slide for Glock19 Gen4 enables shooters to acquire targets more quickly and easily than they can with conventional handgun sights. But don’t worry, it has factory-made sight cutouts for backup “iron” sights in the front and back. (You must install suppressor-height iron sights with an RMR mounted for proper co-witnessing.) To improve airflow and keep the barrel cooler, you can order your RMR Slide with a “window” cutout on top between the front serrations (so they won’t wrap on this one). This option is perfect for competition pistols with hard-working action.  Additionally, the window makes your rifle stand out from the sea of matte black on the shooting line if your modified barrel has a contrasting finish, fluting, spirals, “flames,” or any distinctive exterior pattern. Fits Generation 4 Glock 19 pistols and clones.billet of 17-4 stainless steel, machined  There are window and solid top variants available.Trijicon RMR red dot sight mounting slot that has been pre-cut (with screws)receives red dots from Holosun HE508T, HS507C, and HS407C as well.Each RMR Slide for Gen4 Glock 19 begins as a billet of 17-4 stainless steel that is internally machined to Glock® factory specs so it will fit factory frames, take factory or aftermarket barrels, and have Gen4 internal parts. Black Nitride’s durable, non-reflective coating is resistant to surface scratches and scuffs.  For upgrading your Glock 19 from a great off-the-shelf pistol to the best handgun you’ve ever shot, consider getting an RMR slide! BT Brownells Gun For these slides, a channel liner is needed. The installation of channel liners requires a tool and is a press fit. We advise using #777-100-017. includes the ZEV Technologies-developed, patent-protected optic cut technology. Invention number RE47335 

Buy Glock 19 gen 4

 ZPS.3 Slide for Glock 19  Gen 4

Glock 19 Gen. 4 Zaffiri Precision ZPS.3 slide with MAHI.

Our single billet 17-4 stainless steel slides are produced with exacting tolerances that enable them to function and boost precision. 100% American products are produced at our Largo, Florida, plant. These Glock aftermarket slides are some of the best. This slide cannot be altered because it has already been pre-cut and coated.  If you’re seeking for other optic cutting or color choices, please check out our Custom Line.
(Yellow to Green fading with Blue speckles, Duotone) CUSTOM CERAKOTE – MAHI
Looking for an upper that is ready to assemble? Visit Here Complete G19 Gen 4 Upper

Glock 19 – Gen 4 frame compatible. Additionally suitable for Nomad9 frame.
Features:
100% American-made
ZPS.3 Optic Cut Slide Model: Machined from Billet 17-4 Stainless Steel with Trijicon RMR/SRO and Holosun 407/507 Optics
This slide has been pre-cut and pre-coated. It has a Cerakote® Certified Coating Facility’s MAHI (Yellow to Green fading with Blue speckles) finish.
Included with the mounting hardware is a color-coordinated optics cover plate. *IMPORTANT – This slide is NOT ported compatible. ZP Only the ZPS.P and ZPS.4 slides are compatible with PORTED barrels.
No pieces will be put together. A choice is installation services. 

Optics Cut (Red Dot Footprint): Trijicon RMR / SRO, Holosun 407c / 507c, and other well-known “RMR footprint” optics – mounting position is ahead of the rear sight’s original factory location (dovetail stays behind the optic cut). black anodised cover plate is included. The slide is included with the appropriate mounting screws for the optic. Use only the screws we gave you. It is advised to use Blue Loctite for proper sight retention. Never exceed the screw torque recommendations of the optics manufacturer. Click here for details on additional lengths and torque.

NOTICE: GLOCK does not manufacture, authorize, endorse, or warrant this product. The claim that this product is compatible with GLOCK handguns is neither guaranteed nor made by GLOCK. Zaffiri Precision is not associated with or sponsored by GLOCK, Inc. or GLOCK in any way.

 

Buy Glock 19 gen 4

ZPS.2 Slide for Glock 19 Gen 4-RMR

Our single billet 17-4 stainless steel slides are produced with exacting tolerances that enable them to function and boost precision. 100% American products are produced at our Largo, Florida, plant. These Glock aftermarket slides are some of the best. This slide cannot be altered because it has already been pre-cut and coated.  If you’re seeking for other optic cutting or color choices, please check out our Custom Line.

Compatible with and made to suit the frame of the Glock 19 – Gen 4 pistol. Additionally suitable for Nomad9 frame.

Features: Made entirely in the USAZPS.2 Optic Cut – Trijicon RMR/SRO and Holosun 407/507c Slide Model: Machined from Billet 17-4 Stainless SteelThis slide has already been cut and coated. Four Ceracote colors are available: Magpul OD Green, Sniper Grey, Armor Black, and FDE – Cerakote Certified Coating FacilityIncluded are a black anodized optics cover plate and screws.This slide is NOT port compatible, which is important. Only the ZPS.P and ZPS are compatible with ZP PORTED barrels.four slides.No pieces will be put together. A choice is installation services.  

Buy Glock 19 gen 4

The angled serrations of the Citadel assist you maintain hold by naturally pulling your hand downward and onto the slide when force is applied, regardless of your slide grip location or preference during manipulation. The top sliding channels help protect sight by reducing glare. Our stainless steel slides are made to increase performance and precision. They are produced in our cutting-edge manufacturing facility from a single billet of 17-4 stainless steel with tighter tolerances than OEM slides for improved accuracy and more consistent barrel lockup. All ZEV slides have the company’s proprietary optic cut, which has pins and additional thread space to keep your optic firmly attached to your slide. ZEV slides are lighter than factory slides, which decreases the weight of the reciprocating motion. This lessens fatigue and enables quicker shot follow-up placement.

EQUIPMENT SPECSfabricated from billets of 17-4 stainless steelBrass can be ejected easier thanks to a lower ejection port.tighter than factory tolerances for match grade precision millingimproved grouping and precision after installationThe offered DLC or PVD coatings have a higher Rockwell hardness rating than factory coatings.All Glock compatible slides include a channel liner.

 

Buy Glock 19 gen 4

Glock 19 gen 5 problems

Glock 19 gen 5 problems

Glock 19 gen 5 problemsGlock 19 gen 5 problemsBuy Glock 19 gen 5

Glock 19 gen 5 problems with Useful Solutions

The most popular weapon in the world may be the Glock 19 Gen 5! It unquestionably has one of the coolest finishes available!

That is the most dependable Gen 5 weapon there is! But is it flawless? No.

Slide issues, ejection issues, MOS issues, trigger issues, and barrel issues are the most frequent Glock 19 Gen 5 issues.

Answers to Common Glock 19 Gen 5 Issues

Problems: Solutions

Slide issues: slide troubleshoot.
Ejector problem: repair or replace ejector.
Obtain machined optics for MOS.
Troubleshoot parts or send to Glock for the trigger issue.
Problems with the barrel: Grease the barrel’s outside.

Buy Glock 19 gen 5

Slide Issues

Not usually does the Glock 19 Gen 5 stock lock back on empty.

Racking back from the slip is likewise exceedingly challenging. Particularly 0.1-0.25 inches back, it becomes stuck. The slide appears to be being held somehow.

Possible Motives

Possible causes include the trigger housing’s top, the slide release, or the trigger bar. Use a tiny flashlight to look for rub marks on the slide’s underside or its action components.
The trigger bar, which is active for the first 1/4′′ of slide movement, depresses the safety plunger in the slide. Damage to the trigger bar may result in problems.
A connector that isn’t aligned could be the cause.

The Fix

To determine the problem, take the Glock to a gunsmith or send it to Glock.
It’s likely that you’ll need to swap out the trigger bar, make necessary adjustments to the trigger housing, and deal with the slide release.
Adjust the connector’s orientation as well.

Ejection Problem 

The expulsion is barely audible. The shots regularly struck the head, forearm, and shoulder. The casings can still be stuck.

Possible Motives

The problem here is a poor ejector on the Glock 19 gen 5.
In addition, the Gen 5 guns’ redesigned breach face cut changes how the extractor grabs the bullet.

The Fix

Send it to Glock, let them fix the problem. Then, if you’d like, upgrade the gun. You can install the Glock 19X ejector. Additionally, you should try the Apex Failure Resistant Extractor.

MOS Problem

The firearm doesn’t work well with some optics. Finding the red dot may be challenging when using the Glock 19 Gen 5 and optics from Trijicon (RMR type lenses). 

Possible Motives

The MOS model is not machined deeply enough for some lenses.
Because of the MOS’s plate and screw size dimensions, some lenses cannot be utilized with it.

The Fix

I advise buying the normal Gen5 and having it custom-milled for your choice optic if you want one expressly as an optic pistol.
Other from that, the MOS on this one and Holosun fit perfectly!

 

Buy Glock 19 gen 5

Trigger Issue

Although the Gen 5 trigger is superior, it eventually becomes rather unresponsive. The trigger sometimes goes dead when racking the slide.

Potential Motives

The front of the housing on the 5 is spring-loaded, and the front of the sear is fastened by a S clip.

This S clip will come off with just one stroke from the striker. This results in trigger problems.

The Fix

Move the slide before racking the slide lock.
If that doesn’t work, you’ll have to go back to Glock!
However, make sure the weapon is clean and lubricated before returning to the Glock if the issue persists.

 

Buy Glock 19 gen 5

Barrel Issues

The barrel of the Glock 19 Gen 5 ages quickly and easily.

Potential Motives

The barrels on the Gen 5 Marksman have this issue. This is standard wear for handguns from the fifth generation.
This merely causes the black paint to deteriorate; it has no negative effects on the barrel itself.

The Fix

Applying some oil to the barrel’s exterior will lessen wear. These barrels are exceptionally tough and corrosion-resistant even without a coating.
Try not to switch the barrels, though.

Top 3 Glock 19 Gen 5 Alternative Guns

I’ve identified three Glock 19 Gen 5 alternatives that are the best based on a comparison of their specifications, features, usability, and performance. 

Canik TP9SF Elite

With the gray slide, it is a stunning firearm. superior to the Walther PPQ even.

Its trigger is without a doubt the best on a handgun that fires a striker. When compared to the Glock 19 Gen 5, the Canik is often more accurate to shoot.

SIG P320

Because of the manual safety, it is a dependable and secure firearm. The SIG’s bad customer service, which has gotten worse over time, is the issue, though. Perhaps you prefer this’s modularity to the Glock’s. 

S&W M&P 2.0 Compact

They resemble covert weapons in many ways. The M&P feels better in the hand, though.
Additionally, this one has a more ergonomic design. The M&P trigger also operates much better than the Glock 19 Gen 5 trigger.

Frequently Asked Questions FAQs

How much ammunition can the Glock 19 Gen 5 hold?

Anything with the markings 919, 9mm Luger, or 9mm Parabellum, as well as those with steel, brass, or aluminum-cased bullets.

What feature of the Glock 19 Gen 5 MOS model is superior?

The slide’s optics-related cut.

Can you carry the Glock 19 Gen 5 OWB?

Yes

Does the Gen 4 Glock 19 have MOS?

Yes

What is the Glock 19 gen 5’s most typical wear?

The Barrel 

Conclusion 

There isn’t much left to say about the new polymer Glocks at this time because they are so comparable.

However, the Glock 19 gen 5 is sufficient for appropriate operation and high levels of dependability. However, the Gen 4 can frequently overwhelm the Gen 5.

It’s challenging to select a new generation and disregard alternative advantages in order to purchase the “latest and greatest” product.

I wholeheartedly endorse the Glock 19, but consider Gen 4 before deciding on Gen 5! 

Buy Glock 19 gen 5

Glock 19 gen 3 slide

Glock 27 gen 5 review

Glock 19 gen 3 slideGlock 19 gen 3 slideBuy Glock 19 gen 3

Glock 19 gen 3 slide

The Glock 19 Gen 3 Slide line is a fantastic custom assortment that is entirely house-built and has excellent looks, dependability, and stability. Our Glock G19 Gen 3 aftermarket slides are renowned for product excellence to meet any need. The stainless steel sliders from Zaffiri Precision are the epitome of precise performance.

Our Glock 19 Entire Slide Set has raised the bar for product quality and sturdiness across sizes, hues, and finishes. The slide kit’s components all fit together precisely. To make a well-informed decision, look through our range of precision slides and slide kits.

A Glock 19 modified slide kit: what is it?

A set of parts or accessories created especially for the Glock 19 is known as a slidekit. This unique Glock19 Gen 3 slide kit is precisely constructed to guarantee optimal frame fit.

What parts are included in a Glock 19 slide kit?

Lower components and the various millimeter range slides are exclusive to the Glock 19 slide kit. Every component of the kit is exact and carefully crafted thanks to advancements in Glock sliding generations.

When coupled with our Gen 5 G34 Optimized Match barrel, this extra long conversion slide transforms any Gen 3 Glock 19 receiver into a Glock 34 length slide.

The angled serrations of the Citadel assist you maintain hold by naturally pulling your hand downward and onto the slide when force is applied, regardless of your slide grip location or preference during manipulation. The top sliding channels help protect sight by reducing glare.

Our stainless steel slides are made to increase performance and precision. They are produced in our cutting-edge manufacturing facility from a single billet of 17-4 stainless steel with tighter tolerances than OEM slides for improved accuracy and more consistent barrel lockup.

2023’s Top Glock 19 Accessories

One of the most sought-after handguns on the market right now is the Glock 19. Guns made by GLOCK GES.M.B.H are known for being adaptable, dependable, and enjoyable to shoot. Also, you may add a variety of aftermarket accessories to your Glock 19 to make it exactly what you need it to be. Here are a few of our preferred Glock 19 extras.

WHY DOES THE GLOCK NEED ANY MODIFICATIONS OR UPDATES?

Why do you need to improve or modify the pistol if the Glock 19 is such a fantastic pick for a firearm? Glock pistols are found to be in excellent condition when they leave the factory, but they are standardized when you first buy one.

As you modify your weapon, you can:

Improve the hand’s comfort in the grip.
Include new sights
To suit your tastes, change the appearance.

THE BEST ACCESSORIES FOR THE GLOCK 19 RANGE

A nice firearm to use at the range is the Glock 19. For range shooting, competitors frequently choose the 19 as their weapon of choice. When the correct extras are used, the gun’s already excellent performance is enhanced.

COMPENSATORS 

To enhance performance at the range, we advise aftermarket compensators. Gases released from the barrel of the Glock 19 are lessened by the right compensator. Your gun will stay flatter when you shoot thanks to this method.
 
With the aid of a decent compensator, you may take follow-up shots more quickly while avoiding the problems brought on by excessive recoil. You should be aware that not all tournaments will allow you to mount a compensator on your Glock 19.
 
We advise that you think about the following if compensators for your Glock 19 are something you’re interested in:
Tyrant Designs’ Gen. 4 T-Comp Glock Compensator with Strike Industries’ Gen. 4 Mass Driver Comp
Legion Precision’s 9mm Pistol Compensator
 
High recoil frequently aggravates muzzle rise, which bothers rookie shooters or people looking to have fun at the range. A appropriate aftermarket compensator will help you to limit this problem.
 

Magazines

Moreover, you may increase your magazine for excellent range shooting. A better-protected base pad is frequently included with magazine upgrades. You can also increase the capacity of your Glock 19’s aftermarket magazines, which means you won’t need to reload as frequently.Potential Motives

Slide cycling speed and recoil spring stiffness may also be problematic. Also, Glock doesn’t lube their firearms before discharging them.

For aftermarket mags, take into account these choices:

Taylor Freelance’s Glock 140MM + 5 Delrin Mag Extension

Gen 2 9mm Glock Magazine from KCI USA

27-round magazine for the Glock 9MM by Elite Tactical Systems

We can respond to your inquiries regarding the advantages of an extended magazine release that is compatible with genuine Glock components.

magazine Issues

Moreover, you may increase your magazine for excellent range shooting. A better-protected base pad is frequently included with magazine upgrades. You can also increase the capacity of your Glock 19’s aftermarket magazines, which means you won’t need to reload as frequently.

For aftermarket mags, take into account these choices:

Taylor Freelance’s Glock 140MM + 5 Delrin Mag Extension
Gen 2 9mm Glock Magazine from KCI USA
27-round magazine for the Glock 9MM by Elite Tactical Systems
We can respond to your inquiries regarding the advantages of an extended magazine release that is compatible with genuine Glock components.
 

EXTENDED MAGAZINES

 You may increase your fire power with EXTENDED MAGAZINES, and many of them are affordable. The Glock 9mm 33Round Extension Magazine, which has a stylish matte black polymer and steel casing, is our favorite.

This specific magazine is one of the most adaptable and useful Glock 19 accessories we’ve featured because it works with all Glock 19 versions.

MAGAZINE EXTENSIONS

You could be asking yourself, “Wait, isn’t it the same as an extended magazine?” Not exactly. In contrast to an extended magazine, which is just a new magazine with a higher capacity, a magazine extension enables you to alter an existing magazine to enhance its capacity.

What’s the distinction? Cost and work. Although using a magazine extension takes a little more work, buying an expanded magazine costs a little more. Which is the superior Glock 19 accessory for you depends on your tastes; both produce the same outcome.

EXTENDED MAG RELEASE BUTTON

Although the MAGAZINE RELEASE BUTTON on the Glock 19 Gen4 was a significant improvement over the previous generation, a longer mag release button can significantly reduce reload times for earlier models. You may release the magazine with your thumb without having to move your hand, saving you valuable time.

An longer mag release button can still be useful for Gen4 and later models, but not as much. There is no danger in trying it out because this Glock addition is reasonably priced; the stopwatch will determine whether it was worthwhile.

MAGWELLS

Another way to shorten load times is by using a magwell. If you’re not familiar with the phrase, a magwell is essentially a magazine funnel because it has a bigger opening and directs the magazine into position. They are widely used in competitive shooting, when accuracy is crucial and stress levels could be a little higher. Even novice shooters can reload without glancing down with a decent magwell.

Buy Glock 19 gen 3

THE BEST ACCESSORIES FOR COVERT CARRY

When you conceal carry, the correct Glock accessories can make you feel more at ease and secure. We advise you to examine local and state rules governing concealed carry before upgrading your firearm. Make sure to get upgrades that let you keep carrying your gun.

A Glock 19 is now easier to conceal carry thanks to a number of modifications.

LEVER FOR EXTENDED SLIDE

The Glock 19’s slide stops might be challenging for some people to use. With Glock’s enlarged slide stop lever, releasing the slide with your thumb is simpler. Your ability to conceal your firearm shouldn’t be made more difficult by the lengthened lever.

UPDATES TO TRIGGER CONNECTOR

Are you looking to improve the accuracy of your Glock 19 shooting? If so, an aftermarket trigger connector would be something to think about. The Ghost 3.5 lb. trigger connector lightens the trigger’s load and provides consistently excellent performance. The Ghost model’s ability to self-clean is another reason why we appreciate it.

AFFORDABLE GRIPS

The grip’s quality is important if you plan to carry your Glock 19 frequently. As you draw your weapon, you want to be able to hold something that is secure and comfortable. Glock 19-compatible grips are available from Talon Grips.

Rubber grips are advised if you intend to conceal carry. Rubber is far less likely than granulate grips to catch on your clothing. But, while deciding which grip to use, your comfort comes first.

You need a grip that won’t get in the way when you take your gun out of your holster. When choosing an aftermarket item, bear this in mind. Consider using a quality conceal carry holster, such as an IWB holster. 

THE BEST BARREL UPDATES

Are you thinking of getting a new barrel for your Glock 19? A lot of shooters choose to modify their barrels just for aesthetic reasons. You could, for instance, change the barrel’s color to a different gray tone or to something more striking, like orange.

Others choose to investigate a threaded barrel. If you want features for compensation or suppression, threaded barrels are a requirement. You have a lot of options because many businesses offer threaded options for their aftermarket barrels.

If you want to use cast lead ammunition, you might want to upgrade to a barrel with alternative rifling. Such ammo cannot be fired with OEM Glock designs.

Our group suggests the following barrel upgrades:

Grey Ghost Precision Optimized Match Grade G17 by Zev Technologies Precision Match Glock 19 Gen 5 Barrel L2D Combat’s Glock 19 Barrel

You could want to upgrade your feed ramp in regards to the barrel. Due to the reputation of Glocks for dependability, you can have faith that the firearm will load and discharge correctly each time you pull the trigger. But, an aftermarket polished feed ramp can help you feel more at ease using the firearm.

BEST SLIDE MODIFICATIONS

You can find fun and practical upgrades for the slide of your Glock 19. You can change the aesthetics of your entire gun by changing up the slide. Many companies offer slides in different colors, giving you a chance to put your mark on the firearm.

Professional, gray designs have become an unofficial trademark of Glock firearms. You can move beyond this stylistic choice with aftermarket slide upgrades. However, upgrading your slide goes beyond mere appearances.

Many gun owners desire the following slide upgrades:

 Add red-dot sight mounting.improve the fitting and firing portsIncreasing ejection speedsBoost the gun’s precisionYou can also modify your slide to improve your gun’s lubrication or corrosion resistance, depending on your preferences. These slides typically have a variety of coatings that offer a number of advantages.

Buy Glock 19 gen 3